Plate heat exchanger is composed of many plates

Plate heat exchanger is mainly composed of plate, sealing gasket, fixed pressing plate, movable pressing plate, inlet and outlet flange, clamping bolt, upper guide rod, lower guide rod, column and other parts. The plate heat exchanger is composed of many plates. There are four corner holes on the plates for the passage of two kinds of heat transfer liquids. The plates are installed in a frame with a fixed compression plate and a movable compression plate on one side and clamped with clamping bolts. There are sealing gaskets in the grooves around the plates. The sealing gaskets seal the fluid channels and guide the fluid to flow alternately to their respective channels to form heat exchange. The plate and the movable pressing plate are suspended on the upper guide rod and positioned by the lower guide rod, and the rod end is fixed on the support column.

Introduction of plate structure of plate heat exchanger

There are four corner holes on the plate of the plate heat exchanger for the passage of two kinds of heat transfer liquids. The plate is installed in a frame with a fixed pressing plate and a movable pressing plate on one side and clamped with clamping bolts. There are sealing gaskets in the grooves around the plate. The sealing gaskets seal the fluid channels and guide the fluid to flow alternately to their respective channels to form heat exchange. The plate and the movable pressing plate are suspended on the upper guide rod and positioned by the lower guide rod, and the rod end is fixed on the support column. Fixed pressing plate, movable pressing plate, guide rod, bolt, nut and front support can be collectively referred to as the frame of plate heat exchanger.